Saltar al contenido principal

Capresso Perfectea 260 Motherboard Replacement

Qué necesitas

  1. Capresso Perfectea 260 Motherboard Replacement, Motherboard: paso 1, imagen 1 de 1
    • First, take the base of the device and flip it over.

  2. Capresso Perfectea 260 Motherboard Replacement: paso 2, imagen 1 de 2 Capresso Perfectea 260 Motherboard Replacement: paso 2, imagen 2 de 2
    • Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

  3. Capresso Perfectea 260 Motherboard Replacement: paso 3, imagen 1 de 1
    • Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

  4. Capresso Perfectea 260 Motherboard Replacement: paso 4, imagen 1 de 1
    • Unplug the wire going into the side of the motherboard

  5. Capresso Perfectea 260 Motherboard Replacement: paso 5, imagen 1 de 2 Capresso Perfectea 260 Motherboard Replacement: paso 5, imagen 2 de 2
    • Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

    • Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

    • Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

  6. Capresso Perfectea 260 Motherboard Replacement: paso 6, imagen 1 de 1
    • Lift the motherboard out of the device

Conclusión

To reassemble your device, follow these instructions in reverse order.

Rohin Chander

Miembro Desde 04/14/15

101 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 6-17, Maness Spring 2015 Miembro de Cal Poly, Team 6-17, Maness Spring 2015

CPSU-MANESS-S15S6G17

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 228