Repara tus cosas Comunidad Tienda

Canon ZR70MC LCD Component Replacement

Introducción

Use this guide to replace the LCD screen on your device.

Qué necesitas

  1. Canon ZR70MC LCD Component Replacement, Front Panel: paso 1, imagen 1 de 2 Canon ZR70MC LCD Component Replacement, Front Panel: paso 1, imagen 2 de 2

    • Unscrew the 3.35mm screw.

    Traducir

  2. Canon ZR70MC LCD Component Replacement: paso 2, imagen 1 de 1

    • Turn the ZR70MC so that you can see the bottom of the camcorder.

    • Unscrew the 3.35 mm located in the top left portion of the camera.

    Traducir

  3. Canon ZR70MC LCD Component Replacement: paso 3, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 3, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 3, imagen 3 de 3

    • Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.

    • Remove the 2.65 mm screw.

    Traducir

  4. Canon ZR70MC LCD Component Replacement: paso 4, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 4, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 4, imagen 3 de 3

    • Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.

    • Locate and remove the two 3.35 mm screws.

    Traducir

  6. Canon ZR70MC LCD Component Replacement: paso 5, imagen 1 de 2 Canon ZR70MC LCD Component Replacement: paso 5, imagen 2 de 2

    • Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.

    • There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

    Traducir

  7. Canon ZR70MC LCD Component Replacement: paso 6, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 6, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 6, imagen 3 de 3

    • Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.

    • The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

    Traducir

  8. Canon ZR70MC LCD Component Replacement: paso 7, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 7, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 7, imagen 3 de 3

    • Use tweezers to gently pull the speaker wire from the main body of the camcorder.

    • Pull the front panel completely away from the main body of the camcorder.

    Traducir

  9. Canon ZR70MC LCD Component Replacement, LCD screen: paso 8, imagen 1 de 3 Canon ZR70MC LCD Component Replacement, LCD screen: paso 8, imagen 2 de 3 Canon ZR70MC LCD Component Replacement, LCD screen: paso 8, imagen 3 de 3

    • Open the LCD screen.

    • Locate and remove the 2.7 mm screw on the bottom of the LCD monitor.

    Traducir

  10. Canon ZR70MC LCD Component Replacement: paso 9, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 9, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 9, imagen 3 de 3

    • Turn the LCD monitor so that the screen is facing down.

    • There is a 2.7 mm screw on the LCD monitor where the monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    Traducir

  11. Canon ZR70MC LCD Component Replacement: paso 10, imagen 1 de 2 Canon ZR70MC LCD Component Replacement: paso 10, imagen 2 de 2

    • Turn the LCD monitor so that the screen is facing up.

    • There is a 2.7 mm screw located where the LCD monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    Traducir

  12. Canon ZR70MC LCD Component Replacement: paso 11, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 11, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 11, imagen 3 de 3

    • Now that all the screws are removed, use the plastic opening tool to gently pry the LCD monitor case open.

    Traducir

  13. Canon ZR70MC LCD Component Replacement: paso 12, imagen 1 de 3 Canon ZR70MC LCD Component Replacement: paso 12, imagen 2 de 3 Canon ZR70MC LCD Component Replacement: paso 12, imagen 3 de 3

    • Use tweezers to remove the wire connections that hold the LCD screen in place.

    • Remove the entire LCD screen.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

khalid clarke

Miembro Desde 09/26/17

824 Reputación

7 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team S13-G2, Boczar Fall 2017 Miembro de USF Tampa, Team S13-G2, Boczar Fall 2017

USFT-BOCZAR-F17S13G2

3 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 168