Canon Vixia HF R70 Side Panel Replacement

Introducción

The side panel is the non-glossy part of the camcorder that protects the inner components. It is the first part of the camera that needs to be removed before any internal parts are replaced. Use this guide to remove the side panel to your Canon Vixia HF R70.

Qué necesitas

Paso 1 Battery

Canon Vixia HF R70 Side Panel Replacement, Battery: paso 1, imagen 1 de 1

Power off and unplug the device.
Position the camera so that the battery is facing you.

Editar

Paso 2

Locate the latch on the bottom edge of the camera.
Hold the battery into place and gently push down on the latch towards the lens.

Editar

Paso 3

While holding down the latch, remove the battery by pulling it out of the device.

Editar

Paso 4 Wrist Strap

Canon Vixia HF R70 Side Panel Replacement, Wrist Strap: paso 4, imagen 1 de 1

Position the camcorder so that the wrist strap is facing you.
Locate the loose end of the strap.

Editar

Paso 5

Gently pull on the loose end to separate the Velcro.

Editar

Paso 6

Locate the "slot" on bottom right corner of the camcorder where the strap loops through.
Pull the strap through the loop.

Editar

Paso 7

Pull the strap through the leather cushion.

Editar

Paso 8

Pull the strap through the slot on the left side of the camcorder.

Editar

Paso 9 Side Panel

Canon Vixia HF R70 Side Panel Replacement, Side Panel: paso 9, imagen 1 de 2

Canon Vixia HF R70 Side Panel Replacement, Side Panel: paso 9, imagen 2 de 2

Position the camcorder so that the side panel is facing you.
Locate the two 6mm Phillips #00 screws on the side panel.
Remove the the screws using a screwdriver with a Phillips #00 head.

Editar

Paso 10

Canon Vixia HF R70 Side Panel Replacement: paso 10, imagen 3 de 3

Turn the camcorder so that the bottom is facing you.
Using your screwdriver, locate and remove the four 6mm Phillips #00 screws connecting the side panel to the bottom of the camcorder.

Editar