Repara tus cosas Comunidad Tienda

Canon Vixia HF R70 Lens Replacement

Introducción

Use this guide to remove and replace the lens to your Canon Vixia HF R70.

Qué necesitas

  1. Canon Vixia HF R70 Lens Replacement, Battery: paso 1, imagen 1 de 1

    • Power off and unplug the device.

    • Position the camera so that the battery is facing you.

    Editar

  2. Canon Vixia HF R70 Lens Replacement: paso 2, imagen 1 de 1

    • Locate the latch on the bottom edge of the camera.

    • Hold the battery into place and gently push down on the latch towards the lens.

    Editar

  3. Canon Vixia HF R70 Lens Replacement: paso 3, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement: paso 3, imagen 2 de 2

    • While holding down the latch, remove the battery by pulling it out of the device.

    Editar

  4. Canon Vixia HF R70 Lens Replacement, Wrist Strap: paso 4, imagen 1 de 1

    • Position the camcorder so that the wrist strap is facing you.

    • Locate the loose end of the strap.

    Editar

  5. Canon Vixia HF R70 Lens Replacement: paso 5, imagen 1 de 1

    • Gently pull on the loose end to separate the Velcro.

    Editar

  6. Canon Vixia HF R70 Lens Replacement: paso 6, imagen 1 de 1

    • Locate the "slot" on bottom right corner of the camcorder where the strap loops through.

    • Pull the strap through the loop.

    Editar

  7. Canon Vixia HF R70 Lens Replacement: paso 7, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement: paso 7, imagen 2 de 2

    • Pull the strap through the leather cushion.

    Editar

  9. Canon Vixia HF R70 Lens Replacement: paso 8, imagen 1 de 1

    • Pull the strap through the slot on the left side of the camcorder.

    Editar

  10. Canon Vixia HF R70 Lens Replacement, Side Panel: paso 9, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement, Side Panel: paso 9, imagen 2 de 2

    • Position the camcorder so that the side panel is facing you.

    • Locate the two 6mm Phillips #00 screws on the side panel.

    • Remove the the screws using a screwdriver with a Phillips #00 head.

    Editar

  11. Canon Vixia HF R70 Lens Replacement: paso 10, imagen 1 de 3 Canon Vixia HF R70 Lens Replacement: paso 10, imagen 2 de 3 Canon Vixia HF R70 Lens Replacement: paso 10, imagen 3 de 3

    • Turn the camcorder so that the bottom is facing you.

    • Using your screwdriver, locate and remove the four 6mm Phillips #00 screws connecting the side panel to the bottom of the camcorder.

    Editar

  12. Canon Vixia HF R70 Lens Replacement: paso 11, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement: paso 11, imagen 2 de 2

    • Gently remove the side panel by pushing it up from the bottom.

    Editar

  13. Canon Vixia HF R70 Lens Replacement, Top Panel: paso 12, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement, Top Panel: paso 12, imagen 2 de 2

    • Disconnect the wires by inserting the plastic opening tool into the small slit.

    • Begin to push upward with the plastic opening tool, disconnecting the two compartments.

    Editar

  14. Canon Vixia HF R70 Lens Replacement: paso 13, imagen 1 de 3 Canon Vixia HF R70 Lens Replacement: paso 13, imagen 2 de 3 Canon Vixia HF R70 Lens Replacement: paso 13, imagen 3 de 3

    • Disconnect the four ZIF connectors by grasping the connector firmly and pulling gently.

    Editar

  15. Canon Vixia HF R70 Lens Replacement: paso 14, imagen 1 de 1

    • Locate and remove the two 3mm Phillips #00 screws on the side of the camera where the side panel was removed.

    Editar

  16. Canon Vixia HF R70 Lens Replacement: paso 15, imagen 1 de 1

    • Turn the camera over to the side with the LCD screen, and open the screen.

    • Locate and remove the three 5mm Phillips #00 screws holding the top panel in place.

    Editar

  17. Canon Vixia HF R70 Lens Replacement: paso 16, imagen 1 de 3 Canon Vixia HF R70 Lens Replacement: paso 16, imagen 2 de 3 Canon Vixia HF R70 Lens Replacement: paso 16, imagen 3 de 3

    • Pull the panel up and away until it is removed completely.

    Editar

  18. Canon Vixia HF R70 Lens Replacement, Shutter: paso 17, imagen 1 de 3 Canon Vixia HF R70 Lens Replacement, Shutter: paso 17, imagen 2 de 3 Canon Vixia HF R70 Lens Replacement, Shutter: paso 17, imagen 3 de 3

    • There are three 5mm Phillips #00 screws that need to be removed - one on the top, one on the side, and one on the bottom.

    • Locate and remove the screw on the top side of the camera.

    • Locate and remove the screw on the side of the camera where you previously removed the side panel.

    • Locate and remove the screw on the bottom of the camera.

    Editar

  19. Canon Vixia HF R70 Lens Replacement: paso 18, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement: paso 18, imagen 2 de 2

    • Pull the entire shutter away from the body of the camera to remove it.

    Editar

  20. Canon Vixia HF R70 Lens Replacement, Lens: paso 19, imagen 1 de 2 Canon Vixia HF R70 Lens Replacement, Lens: paso 19, imagen 2 de 2

    • With the front of the camera facing you, locate and remove the three 5mm Phillips #00 screws that hold the lens in place.

    Editar

  21. Canon Vixia HF R70 Lens Replacement: paso 20, imagen 1 de 3 Canon Vixia HF R70 Lens Replacement: paso 20, imagen 2 de 3 Canon Vixia HF R70 Lens Replacement: paso 20, imagen 3 de 3

    • Grasp the plastic sides of the lens, and pull it away from the camera body to finish removing the lens.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Kristin Pitts

Miembro Desde 02/28/17

201 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

USF Tampa, Team S2-G2, Nance Spring 2017 Miembro de USF Tampa, Team S2-G2, Nance Spring 2017

USFT-NANCE-S17S2G2

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 592