Saltar al contenido principal

Canon Vixia HF R500 Speaker Replacement

Qué necesitas

  1. Canon Vixia HF R500 Speaker Replacement, Battery: paso 1, imagen 1 de 1
    • Hold on to the battery.

  2. Canon Vixia HF R500 Speaker Replacement: paso 2, imagen 1 de 1
    • On the bottom of the battery hold the battery release switch.

  3. Canon Vixia HF R500 Speaker Replacement: paso 3, imagen 1 de 1
    • Remove the battery slowly away from the camcorder.

    • Removing the battery quick or in a different angle may cause sparks and damage to device.

  4. Canon Vixia HF R500 Speaker Replacement, Grip Belt: paso 4, imagen 1 de 3 Canon Vixia HF R500 Speaker Replacement, Grip Belt: paso 4, imagen 2 de 3 Canon Vixia HF R500 Speaker Replacement, Grip Belt: paso 4, imagen 3 de 3
    • On the right side of the camcorder remove the grip belt.

  5. Canon Vixia HF R500 Speaker Replacement, Canon Vixia HF R500 Disassembly: paso 5, imagen 1 de 2 Canon Vixia HF R500 Speaker Replacement, Canon Vixia HF R500 Disassembly: paso 5, imagen 2 de 2
    • Remove the two 8mm Philips #000 screws on the side where the grip belt was located on.

  6. Canon Vixia HF R500 Speaker Replacement: paso 6, imagen 1 de 1
    • Remove the two 4mm Philips #000 head screws from the bottom of the camcorder.

    • A hidden 4mm Philips #000 screw is shown under the black plug shown.

  7. Canon Vixia HF R500 Speaker Replacement: paso 7, imagen 1 de 1
    • Remove the side piece plate.

  8. Canon Vixia HF R500 Speaker Replacement: paso 8, imagen 1 de 1
    • Near the LCD screen, remove the three 7mm Philips #000 screws in the picture shown.

  9. Canon Vixia HF R500 Speaker Replacement: paso 9, imagen 1 de 1
    • Carefully place the camcorder where the inside of the device is facing upwards and remove the 3mm Philips #000 screw shown.

    • Do not use strong magnetic parts on the inside, as they may damage the device.

  10. Canon Vixia HF R500 Speaker Replacement: paso 10, imagen 1 de 1
    • Using the spudger, pull the tab shown to start removing the ribbon cable.

  11. Canon Vixia HF R500 Speaker Replacement: paso 11, imagen 1 de 3 Canon Vixia HF R500 Speaker Replacement: paso 11, imagen 2 de 3 Canon Vixia HF R500 Speaker Replacement: paso 11, imagen 3 de 3
    • Using the Spudger, carefully remove the two ribbon cables that are connected to the top of the device.

  12. Canon Vixia HF R500 Speaker Replacement: paso 12, imagen 1 de 1
    • Remove the top piece.

  13. Canon Vixia HF R500 Speaker Replacement, Speaker: paso 13, imagen 1 de 2 Canon Vixia HF R500 Speaker Replacement, Speaker: paso 13, imagen 2 de 2
    • Remove the three 6mm Philips #000 screws holding the black record piece.

  14. Canon Vixia HF R500 Speaker Replacement: paso 14, imagen 1 de 1
    • Remove the black record piece.

  15. Canon Vixia HF R500 Speaker Replacement: paso 15, imagen 1 de 2 Canon Vixia HF R500 Speaker Replacement: paso 15, imagen 2 de 2
    • Holding the full top piece remove the six 5mm Philips #000 screws holding the metal frame to the top piece.

  16. Canon Vixia HF R500 Speaker Replacement: paso 16, imagen 1 de 1
    • Carefully remove the the whole metal frame out of the device piece.

  17. Canon Vixia HF R500 Speaker Replacement: paso 17, imagen 1 de 1
    • Replace the defective speaker with a functioning one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 169