Saltar al contenido principal

Canon Vixia HF R500 Disassembly

Qué necesitas

  1. Canon Vixia HF R500 Disassembly, Canon Vixia HF R500 Disassembly: paso 1, imagen 1 de 2 Canon Vixia HF R500 Disassembly, Canon Vixia HF R500 Disassembly: paso 1, imagen 2 de 2
    • Remove the two 8mm Philips #000 screws on the side where the grip belt was located on.

  2. Canon Vixia HF R500 Disassembly: paso 2, imagen 1 de 1
    • Remove the two 4mm Philips #000 head screws from the bottom of the camcorder.

    • A hidden 4mm Philips #000 screw is shown under the black plug shown.

  3. Canon Vixia HF R500 Disassembly: paso 3, imagen 1 de 1
    • Remove the side piece plate.

  4. Canon Vixia HF R500 Disassembly: paso 4, imagen 1 de 1
    • Near the LCD screen, remove the three 7mm Philips #000 screws in the picture shown.

  5. Canon Vixia HF R500 Disassembly: paso 5, imagen 1 de 1
    • Carefully place the camcorder where the inside of the device is facing upwards and remove the 3mm Philips #000 screw shown.

    • Do not use strong magnetic parts on the inside, as they may damage the device.

  6. Canon Vixia HF R500 Disassembly: paso 6, imagen 1 de 1
    • Using the spudger, pull the tab shown to start removing the ribbon cable.

  7. Canon Vixia HF R500 Disassembly: paso 7, imagen 1 de 3 Canon Vixia HF R500 Disassembly: paso 7, imagen 2 de 3 Canon Vixia HF R500 Disassembly: paso 7, imagen 3 de 3
    • Using the Spudger, carefully remove the two ribbon cables that are connected to the top of the device.

  8. Canon Vixia HF R500 Disassembly: paso 8, imagen 1 de 1
    • Remove the top piece.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 686