Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon Powershot SD550 LCD Screen Replacement

Qué necesitas

  1. Canon Powershot SD550 LCD Screen Replacement, Outer Case: paso 1, imagen 1 de 1
    • Remove the battery and SD card from the camera.

  2. Canon Powershot SD550 LCD Screen Replacement: paso 2, imagen 1 de 1
    • Remove the three 3.8 mm screws from the underside of the camera.

    • Each of the screws is slightly different, so it is important that you note the original location of each screw.

  3. Canon Powershot SD550 LCD Screen Replacement: paso 3, imagen 1 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 3, imagen 2 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 3, imagen 3 de 3
    • Remove the 3.2 mm screw from the right side of the camera.

    • Remove the 2.2 mm screw from the right side of the camera.

    • One of these screws is hidden under the USB port cover.

    • Lift the side panel off.

    • Remove the 1.8 mm screw from underneath the side panel.

  4. Canon Powershot SD550 LCD Screen Replacement: paso 4, imagen 1 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 4, imagen 2 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 4, imagen 3 de 3
    • Remove the two 2.2 mm screws from the left side of the camera.

    • Lift the plate from the camera.

  5. Canon Powershot SD550 LCD Screen Replacement: paso 5, imagen 1 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 5, imagen 2 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 5, imagen 3 de 3
    • Gently lift the rear of the case to remove it from the camera.

  6. Canon Powershot SD550 LCD Screen Replacement: paso 6, imagen 1 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 6, imagen 2 de 3 Canon Powershot SD550 LCD Screen Replacement: paso 6, imagen 3 de 3
    • Remove the front of the camera body.

    • Be sure to keep track of the rubber ring.

  7. Canon Powershot SD550 LCD Screen Replacement, LCD Screen: paso 7, imagen 1 de 3 Canon Powershot SD550 LCD Screen Replacement, LCD Screen: paso 7, imagen 2 de 3 Canon Powershot SD550 LCD Screen Replacement, LCD Screen: paso 7, imagen 3 de 3
    • Next, peel the navigation buttons from the button panel and set them aside.

    • To free the LCD display, remove the .113 inch screw in the top left corner.

    • Then, rotate the screen clockwise until it lifts away from the camera.

    • There are two ribbon cables attached to the rear of the screen. Do not try to pull the screen off at this point.

  8. Canon Powershot SD550 LCD Screen Replacement: paso 8, imagen 1 de 2 Canon Powershot SD550 LCD Screen Replacement: paso 8, imagen 2 de 2
    • To unplug the ribbon cables, pull them straight out of their plugs. Do this gently to avoid damaging the connections.

    • After disconnecting both cables, pull the screen away from the camera to remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Vivian Su

Miembro Desde 04/17/11

16 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 18-23, Garner Spring 2011 Miembro de Cal Poly, Team 18-23, Garner Spring 2011

CPSU-GARNER-S11S18G23

5 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 17

Todo El Tiempo: 3,253