Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon Powershot S200 Motherboard Replacement

Introducción

The motherboard controls the operations of the camera. Damage to the motherboard requires an entirely new motherboard.

Qué necesitas

  1. Canon Powershot S200 Motherboard Replacement, Battery: paso 1, imagen 1 de 2 Canon Powershot S200 Motherboard Replacement, Battery: paso 1, imagen 2 de 2

    • Slide the grey latch to open the battery compartment.

    Traducir

  2. Canon Powershot S200 Motherboard Replacement: paso 2, imagen 1 de 2 Canon Powershot S200 Motherboard Replacement: paso 2, imagen 2 de 2

    • Push and slide the orange retaining clip to the right to remove the battery.

    Traducir

  3. Canon Powershot S200 Motherboard Replacement: paso 3, imagen 1 de 1

    • Remove battery from the camera.

    Traducir

  4. Canon Powershot S200 Motherboard Replacement, Motherboard: paso 4, imagen 1 de 1

    • Remove the lanyard.

    Traducir

  5. Canon Powershot S200 Motherboard Replacement: paso 5, imagen 1 de 1

    • Remove the two 2.3mm screws (underneath the name plate) and two 2.8mm screws (next to the threaded tripod mount) from the bottom face of the camera.

    • Be careful to keep track of the different screw sizes as you proceed with this guide.

    Traducir

  6. Canon Powershot S200 Motherboard Replacement: paso 6, imagen 1 de 1

    • Remove the single 3.8mm screw from the back face of the camera.

    Traducir

  8. Canon Powershot S200 Motherboard Replacement: paso 7, imagen 1 de 1

    • Remove the two 2.3mm screws from the right face of the camera.

    Traducir

  9. Canon Powershot S200 Motherboard Replacement: paso 8, imagen 1 de 1

    • Remove the two 3.2mm screws (outside edge) and two 3.7mm screws (towards middle) from the left side of the camera body.

    Traducir

  10. Canon Powershot S200 Motherboard Replacement: paso 9, imagen 1 de 1

    • Pull the back face panel away from the front end of the body. This may take some wiggling and force.

    Traducir

  11. Canon Powershot S200 Motherboard Replacement: paso 10, imagen 1 de 2 Canon Powershot S200 Motherboard Replacement: paso 10, imagen 2 de 2

    • Remove the CF card door from the left side of the camera body.

    Traducir

  12. Canon Powershot S200 Motherboard Replacement: paso 11, imagen 1 de 2 Canon Powershot S200 Motherboard Replacement: paso 11, imagen 2 de 2

    • Remove the rubber digital a/v out cap by sliding it out of the groove on the front plate.

    Traducir

  13. Canon Powershot S200 Motherboard Replacement: paso 12, imagen 1 de 1

    • Remove the front face by sliding it off.

    Traducir

  14. Canon Powershot S200 Motherboard Replacement: paso 13, imagen 1 de 1

    • Remove the rubber seal that goes over the right side of the viewfinder.

    Traducir

  15. Canon Powershot S200 Motherboard Replacement: paso 14, imagen 1 de 1

    • Remove the two 3.9mm screws that retain the laminated cooper sheet.

    Traducir

  16. Canon Powershot S200 Motherboard Replacement: paso 15, imagen 1 de 2 Canon Powershot S200 Motherboard Replacement: paso 15, imagen 2 de 2

    • Remove the seven wire connections that connect to the motherboard.

    Traducir

  17. Canon Powershot S200 Motherboard Replacement: paso 16, imagen 1 de 1

    • Remove the single 3.8mm screw that is on the motherboard.

    Traducir

  18. Canon Powershot S200 Motherboard Replacement: paso 17, imagen 1 de 1

    • Carefully remove the motherboard from the main frame of the camera body.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 10 otros colaboradores

Orlando Zuniga

Miembro Desde 04/14/11

11 Reputación

1 Guía escrita

Insignias: 3

Equipo

Cal Poly, Team 20-70, Walters Spring 2011 Miembro de Cal Poly, Team 20-70, Walters Spring 2011

CPSU-WALTERS-S11S20G70

5 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 1,879