Saltar al contenido principal

Introducción

This guide will explain the simple process to remove the panel on top of the camera, and to gain access to the speaker.

Partes

No se especificaron partes.

  1. Open the battery compartment and remove the batteries.
    • Open the battery compartment and remove the batteries.

    • Remove the two screws that are deep in the battery compartment with a Phillips #00 screwdriver.

  2. Open the CF compartment and remove the top screw with a Phillips #00 screwdriver. The panel that holds the shutter button and zoom will come off.
    • Open the CF compartment and remove the top screw with a Phillips #00 screwdriver.

    • The panel that holds the shutter button and zoom will come off.

    • Be careful! There are two small wires connecting the speaker to the body of the camera. These are very delicate so proceed with caution. Do not remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Shalan Ertis

Miembro Desde 26/01/10

68 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 14-40, Regan Winter 2010 Miembro de Cal Poly, Team 14-40, Regan Winter 2010

CPSU-REGAN-W10S14G40

5 Miembros

15 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 3,091