Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unlock the battery cover, while swinging the cover outward to open it.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the camera over and allow the batteries to fall out.
-
Close the battery cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 3 mm screws that attach the side panel to the body of the camera.
-
Using your fingernails, pull the side panel outward to remove it.
-
Remove the two remaining 2 mm screws that attach to the frame of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 3 mm screw that sits at the bottom of the camera, near the front side.
-
Remove the 4 mm screw that sits at the bottom of the camera, near the back side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the battery cover.
-
Remove the 5 mm screw that sits on the top of the battery slot.
-
Remove the three 6 mm screws that sit at the bottom of the battery slot.
-
Close the battery cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the digital A/V DC terminal cover.
-
Remove the three 4 mm screws.
-
Detach the digital A/V DC terminal.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Grip the sides of the top cover and gently lift it until it detaches from the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the battery cover.
-
With the camera upside down, pull the side of the front case that is closest to you, in an outward movement.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the memory card slot cover.
-
Remove the 3 mm screw that sits near the bottom of the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the LCD screen all the way open.
-
Grip both sides of top of the back case and gently pull it, in an outward movement, until the case detaches.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.