Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon Powershot A610 Camera Housing Replacement

Qué necesitas

  1. Canon Powershot A610 Camera Housing Replacement, Batteries: paso 1, imagen 1 de 2 Canon Powershot A610 Camera Housing Replacement, Batteries: paso 1, imagen 2 de 2
    • Unlock the battery cover, while swinging the cover outward to open it.

  2. Canon Powershot A610 Camera Housing Replacement: paso 2, imagen 1 de 1
    • Turn the camera over and allow the batteries to fall out.

    • Close the battery cover.

  3. Canon Powershot A610 Camera Housing Replacement, Camera Housing: paso 3, imagen 1 de 3 Canon Powershot A610 Camera Housing Replacement, Camera Housing: paso 3, imagen 2 de 3 Canon Powershot A610 Camera Housing Replacement, Camera Housing: paso 3, imagen 3 de 3
    • Remove the three 3 mm screws that attach the side panel to the body of the camera.

    • Using your fingernails, pull the side panel outward to remove it.

    • Remove the two remaining 2 mm screws that attach to the frame of the camera.

  4. Canon Powershot A610 Camera Housing Replacement: paso 4, imagen 1 de 1
    • Remove the 3 mm screw that sits at the bottom of the camera, near the front side.

    • Remove the 4 mm screw that sits at the bottom of the camera, near the back side.

  5. Canon Powershot A610 Camera Housing Replacement: paso 5, imagen 1 de 1
    • Open the battery cover.

    • Remove the 5 mm screw that sits on the top of the battery slot.

    • Remove the three 6 mm screws that sit at the bottom of the battery slot.

    • Close the battery cover.

  6. Canon Powershot A610 Camera Housing Replacement: paso 6, imagen 1 de 2 Canon Powershot A610 Camera Housing Replacement: paso 6, imagen 2 de 2
    • Open the digital A/V DC terminal cover.

    • Remove the three 4 mm screws.

    • Detach the digital A/V DC terminal.

    • When you reassemble the camera, leave the topmost screw out until after you put the top casing back.

  7. Canon Powershot A610 Camera Housing Replacement: paso 7, imagen 1 de 1
    • Grip the sides of the top cover and gently lift the cover until it detaches from the camera.

    • Do not completely remove the top cover; an orange ribbon cable still connects it to the camera.

  8. Canon Powershot A610 Camera Housing Replacement: paso 8, imagen 1 de 2 Canon Powershot A610 Camera Housing Replacement: paso 8, imagen 2 de 2
    • Open the battery cover.

    • With the camera upside down, pull the front case's side that is closest to you, in an outward movement.

    • Apply some force, but pull it gently to prevent damage.

  9. Canon Powershot A610 Camera Housing Replacement: paso 9, imagen 1 de 2 Canon Powershot A610 Camera Housing Replacement: paso 9, imagen 2 de 2
    • Open the memory card slot cover.

    • Remove the 3 mm screw that sits near the bottom of the case.

  10. Canon Powershot A610 Camera Housing Replacement: paso 10, imagen 1 de 3 Canon Powershot A610 Camera Housing Replacement: paso 10, imagen 2 de 3 Canon Powershot A610 Camera Housing Replacement: paso 10, imagen 3 de 3
    • Flip the LCD screen all the way open.

    • Grip both sides of the back case's top and gently pull it, in an outward movement, until the case detaches.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

Cal Poly, Team 11-26, Maness Winter 2011 Miembro de Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

3 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 23

Todo El Tiempo: 9,062