Repara tus cosas Comunidad Tienda

Canon PowerShot SX160 IS Clock Battery Replacement

Introducción

This guide walks you through how to replace the internal CR1220 battery on your Canon PowerShot SX160 IS by removing the battery tray on your camera.

Qué necesitas

  1. Canon PowerShot SX160 IS Clock Battery Replacement, Clock Battery: paso 1, imagen 1 de 1

    • Locate the internal battery tray on the side of your camera.

    Editar

  2. Canon PowerShot SX160 IS Clock Battery Replacement: paso 2, imagen 1 de 1

    • Use your finger or a spudger to gently pry the battery tray out of the camera.

    Editar

  4. Canon PowerShot SX160 IS Clock Battery Replacement: paso 3, imagen 1 de 1

    • Fully remove the battery tray from the camera.

    Editar

  5. Canon PowerShot SX160 IS Clock Battery Replacement: paso 4, imagen 1 de 1

    • Remove battery from tray and replace.

    Editar
Conclusión

Congratulations, you have successfully replaced the internal battery. To reassemble your device, follow these instructions in reverse order.

36 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Jamie Secretan

Miembro Desde 03/11/15

1,962 Reputación

6 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Colorado Springs, Team 2-3, Panko Spring 2015 Miembro de Colorado Springs, Team 2-3, Panko Spring 2015

UCCS-PANKO-S15S2G3

3 Miembros

6 Guías creadas

17 comentarios

Clear and simple. Thanks!

Jim - Contestar

I had no idea! Thanks!

natorbett - Contestar

Its not necessary to unscrew the tray.

Afzal Pawaskar - Contestar

Gee I thought I am so glad I checked the Internet first...(before I threw it in the trash) that is how frustrating this was. Thank you everyone, I do love this camera

Barbara Rivers - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 8

Ultimos 7 días: 74

Ultimos 30 días: 331

Todo El Tiempo: 47,366