Repara tus cosas Comunidad Tienda

Canon PowerShot SD850 IS Housing Replacement

Guía Archivada
Esta guía se mantiene únicamente para fines históricos. Utiliza la última versión de la guía para llevar a cabo tu reparación.

Introducción

This guide is for accessing the cameras internal components for repairs and troubleshooting.

Qué necesitas

  1. Canon PowerShot SD850 IS Housing Replacement, Housing: paso 1, imagen 1 de 3 Canon PowerShot SD850 IS Housing Replacement, Housing: paso 1, imagen 2 de 3 Canon PowerShot SD850 IS Housing Replacement, Housing: paso 1, imagen 3 de 3

    • To avoid severe electric shock do not remove or tamper with internal camera flash components. An electrical capacitor is attached to the flash that can discharge if contact is made.

    • Remove the two side screws, indicated by the red circles, using a Phillips #00 screwdriver.

    • Remove the screw in the battery port, indicated by the blue circle, again using a Phillips #00 screwdriver.

    • Remove the front face by gently peeling the housing away from the camera.

    Traducir

  3. Canon PowerShot SD850 IS Housing Replacement: paso 2, imagen 1 de 3 Canon PowerShot SD850 IS Housing Replacement: paso 2, imagen 2 de 3 Canon PowerShot SD850 IS Housing Replacement: paso 2, imagen 3 de 3

    • Remove the back face by using a spudger to lift the tab highlighted in yellow

    • Pivot the back face clockwise as seen in the second photo.

    Traducir

  4. Canon PowerShot SD850 IS Housing Replacement: paso 3, imagen 1 de 2 Canon PowerShot SD850 IS Housing Replacement: paso 3, imagen 2 de 2

    • Remove the A/V port cover [no tools are necessary]

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 7 otros colaboradores

iDeleted

Miembro Desde 07/07/10

2,101 Reputación

39 Guías creadas

Insignias: 9

+ 6 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 10

Todo El Tiempo: 851