Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon PowerShot SD800 IS LCD Assembly Replacement

Introducción

Remove the back cover before removing LCD.

Qué necesitas

  1. Canon PowerShot SD800 IS LCD Assembly Replacement, Back Cover: paso 1, imagen 1 de 1

    • Remove one 2.25mm screw on the bottom.

    Traducir

  2. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 2, imagen 1 de 1

    • Remove two 2.25mm screws on the right side looking from the front.

    Traducir

  3. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 3, imagen 1 de 1

    • Remove one 4.7mm screw on the side with the AV output.

    Traducir

  5. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 4, imagen 1 de 1

    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

    Traducir

  6. Canon PowerShot SD800 IS LCD Assembly Replacement, LCD Assembly: paso 5, imagen 1 de 1

    • Remove 2 2.4mm screws on bottom.

    Traducir

  7. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 6, imagen 1 de 1

    • Follow the small data cable to where it connects to the camera.

    • Lift the back white portion to unlock the cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

    Traducir

  8. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 7, imagen 1 de 1

    • Gently lift LCD display off.

    • There will be two data cables still attached to the camera. Do not break them.

    • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

    Traducir

  9. Canon PowerShot SD800 IS LCD Assembly Replacement: paso 8, imagen 1 de 1

    • Follow the larger cable to where it connects to the camera.

    • Lift the front black portion of the connector to unlock the data cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Jeremy Rabaino

Miembro Desde 10/10/10

135 Reputación

6 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team 20-9, Maness Fall 2010 Miembro de Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Miembros

6 Guías creadas

Un comentario

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,275