Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Having removed the battery, you can begin removing the outermost screws on the camera to allow for case replacement. There are 5 screws in total. This will require a Philips head # 00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the front panel of the camera case to expose the top left copper strip, and gently pull the strip upward to disconnect from camera.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the screw on the far left hand side of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now that you have removed all of the screws, carefully pull the case apart at the seem. The case will detach from the camera in two pieces.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the image stabilizer on the top right of the camera and pry the internal battery away from the camera. Having done this, the internal battery can be removed easily.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You have now exposed the internal battery, and you may proceed to exchange the old internal battery for a new one.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.