Introducción

If you experience the E18 error, go to this site and try their solutions. http://www.e18error.com/repair.html

If you still experience the error, you can follow this guide to disassemble the camera and manually clean the inside of the camera and the lens.

Partes

No se requieren partes.

Turn off camera by pressing power button above the LCD screen.
  • Turn off camera by pressing power button above the LCD screen.

  • Remove the battery and memory card.

Agregar Comentario

Remove the screws on the bottom of the camera using a 00 Philip's head screw driver
  • Remove the screws on the bottom of the camera using a 00 Philip's head screw driver

Agregar Comentario

  • Remove the screws on the right side of the camera.

Agregar Comentario

  • Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.

Agregar Comentario

  • Remove the screws on the bottom of the camera near the battery and the memory card slots.

  • This screw is longer than the rest of the screws.

Agregar Comentario

  • Remove the front back and side casings from the camera.

Agregar Comentario

  • Once you have removed the front case, clean the lens and area surrounding the lens with a brush. Tweezers can be helpful when removing sand.

  • Once clean, reassemble the camera and if the E18 error persists, further disassembly of the camera may be required.

  • If you still experience E18 error, follow the lens dissasembly guide.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Lee

Miembro Desde 07/04/11

187 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 9-71, Walters Spring 2011 Miembro de Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 2,385