Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 2mm black screws that are located on the underside of the camera.
-
Remove the two 3mm silver screws from the right side of camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the tweezers to pull up on the piece of black plastic connected to the ribbon to unhook and remove the ribbon connected to the screen.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the camera over to the side with the lens and remove the ribbon on the left side.
-
After removing the ribbon there will be a second ribbon to remove that was hiding underneath the first ribbon.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the button that connects to the power button of the camera so you can remove the control panel.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.