Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
In this guide we will be replacing the screen of a Canon PowerShot G3.
Qué necesitas
-
-
On the bottom of the camera, push and slide open the battery compartment.
-
Remove the battery.
-
-
-
-
Replace back panel. Make sure the metal part of the panel goes under the metal part of the rotating arm or the screw won't go in.
-
Put the four screws back in from step 2 and 3 respectively.
-
Step 2 screws go in the outside of the panel. Step 3 screws go in on the underside of the panel.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
2 comentarios
I'm guessing that the screen is OK and the wiring/connections is the problem.