Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • The battery hatch is on the bottom of the camera.

    • CAUTION: Locate the switch to open the hatch and push gently toward the front of the camera. Too much force can break the hatch.

    • While the switch is pushed forward, pull the cover away from the camera.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1
    • This camera requires AA batteries.

    • To remove batteries, simply allow them to fall out of the camera.

    • Use a fingernail to lift the clock battery out of the camera.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • To access the clock battery, find the clock battery cover, shown here in the red square.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1
    • When accessing the clock battery, use a fingernail or similar small instrument to gently pull the tab out.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 1
    • Now that you have the tab and battery removed, use a fingernail or other small tool to remove the battery from the tab.

    • This battery is a CR1220 type watch battery.

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 1
    • When replacing the clock battery, be sure to have the battery oriented properly, as shown in the picture.

    • Remember, the tab goes in with the exposed side of the battery facing towards the lens.

Linea de Meta

13 personas más completaron esta guía.

Matt Wolfe

Miembro Desde 10/11/10

405 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 9-19, Regan Fall 2010 Miembro de Cal Poly, Team 9-19, Regan Fall 2010

CPSU-REGAN-F10S9G19

4 Miembros

14 Guías creadas

9 comentarios

thanks its very useful forme

srikrishnan2003 - Contestar

thank you, very useful for my old camera :)

agungsp2000 - Contestar

Perfect! I never even knew I had this battery in there. Couldn't figure out why the date and time wouldn't stay set every time I shut it off. And then I found the answer here.

Thank you very much for the post!

sherlock261 - Contestar

I'm a senior citizen and am not very good with modern technology. Been going crazy trying to set my clock in my digital camera. I didn't want to buy a new one because I have had this one for years (Power Shot A590) and didn't want to have to learn to use a newer one. Finally got smart enough to do a google search for an answer. Will get a new battery tomorrow and solve my problem. Thanks for the help!...the information age is good for something after all.

Pat Solomon - Contestar

Wow this is a great site. I got the answer I needed right away. The instructions were clear, simple and correct. Thank you.

You are bookmarked.

jeffrey wales - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 16

Ultimos 30 días: 107

Todo El Tiempo: 14,598