Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
First, we will locate the battery/memory card hatch. Second, we will change the main batteries and orient them properly. Third, we will change the clock battery.
Qué necesitas
-
-
The battery hatch is on the bottom of the camera.
-
While the switch is pushed forward, pull the cover away from the camera.
-
-
-
-
This camera requires AA batteries. To remove batteries, simply allow them to fall out of the camera.
-
The clock battery cover is shown here in the purple circle. Use a fingernail to lift the battery out of the camera.
-
-
-
When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.
-
To install new batteries and reassemble your device, follow these instructions in reverse order.
To install new batteries and reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.