Repara tus cosas Comunidad Tienda

Canon PowerShot A460 Front Casing Replacement

Introducción

This guide will guide the user toward removing the front casing of a Canon PowerShot A460 to prepare the camera for future repairs.

Qué necesitas

  1. Canon PowerShot A460 Front Casing Replacement, Battery: paso 1, imagen 1 de 1

    • Slide the switch on the battery cover labeled "CARD/BATT. OPEN." to the right.

    • While still holding the switch, pull the cover down, allowing it to release and open.

    Editar

  2. Canon PowerShot A460 Front Casing Replacement: paso 2, imagen 1 de 1

    • Tilt the camera slightly to allow the batteries to fall out.

    Editar

  3. Canon PowerShot A460 Front Casing Replacement: paso 3, imagen 1 de 1

    • Press on and release the memory card to eject it.

    Editar

  4. Canon PowerShot A460 Front Casing Replacement, Front Casing: paso 4, imagen 1 de 1

    • Unscrew the 5mm Phillips #00 screw from the bottom of the camera.

    • Make sure to keep the different size screws organized to make reassembling the camera simpler.

    Editar

  6. Canon PowerShot A460 Front Casing Replacement: paso 5, imagen 1 de 1

    • Unscrew the three 2mm Phillips #00 screws that are located on the bottom of the camera.

    Editar

  7. Canon PowerShot A460 Front Casing Replacement: paso 6, imagen 1 de 1

    • Remove the 4mm Phillips #00 screw that is located on the left side of the camera, if the display screen is facing you.

    Editar

  8. Canon PowerShot A460 Front Casing Replacement: paso 7, imagen 1 de 1

    • Take out the 4mm Phillips #00 screw under the rubber flap on the right end of the camera.

    Editar

  9. Canon PowerShot A460 Front Casing Replacement: paso 8, imagen 1 de 2 Canon PowerShot A460 Front Casing Replacement: paso 8, imagen 2 de 2

    • Remove the second battery cover on the bottom of camera.

    • Take the silver battery out of the camera.

    Editar

  10. Canon PowerShot A460 Front Casing Replacement: paso 9, imagen 1 de 3 Canon PowerShot A460 Front Casing Replacement: paso 9, imagen 2 de 3 Canon PowerShot A460 Front Casing Replacement: paso 9, imagen 3 de 3

    • Remove the 4mm Phillips #00 screw on the inside of the flap that hides the battery and memory card slots.

    • Remove the light grey, plastic piece.

    • Remove the plastic portion of the battery flap cover. The metal piece will remain attached.

    Editar

  11. Canon PowerShot A460 Front Casing Replacement: paso 10, imagen 1 de 3 Canon PowerShot A460 Front Casing Replacement: paso 10, imagen 2 de 3 Canon PowerShot A460 Front Casing Replacement: paso 10, imagen 3 de 3

    • Slightly pull on each side of the camera. It should loosen up and come apart.

    • If it does not pull apart right away, use a little more force.

    • Do not give up!

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 9 otros colaboradores

Alex

Miembro Desde 01/18/13

85 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 19-42, Regan Winter 2013 Miembro de Cal Poly, Team 19-42, Regan Winter 2013

CPSU-REGAN-W13S19G42

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 785