Skip to main content

Introduction

If your LCD is cracked or not turning on replace it with this guide.

  1. Using the plastic opening tool, pry off the top cover of the LCD assembly. Pry around the front and side edges for the easiest removal.
    • Using the plastic opening tool, pry off the top cover of the LCD assembly.

    • Pry around the front and side edges for the easiest removal.

  2. After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.
    • After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.

  3. Completely remove the LCD by disconnecting the ribbon cable with a gentle pull.
    • Completely remove the LCD by disconnecting the ribbon cable with a gentle pull.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Steven MacLean

Member since: 14/01/13

86 Reputation

2 Guides authored

Team

Cal Poly, Team 19-41, Regan Winter 2013 Member of Cal Poly, Team 19-41, Regan Winter 2013

CPSU-REGAN-W13S19G41

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 1,102