Repara tus cosas Comunidad Tienda

Canon PIXMA iP3600 Printhead Replacement

Introducción

If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

  1. Canon PIXMA iP3600 Printhead Replacement, Ink Cartridges: paso 1, imagen 1 de 1

    • Press the power button to turn on the printer.

    Editar

  2. Canon PIXMA iP3600 Printhead Replacement: paso 2, imagen 1 de 1

    • Pull down the front output tray cover.

    Editar

  3. Canon PIXMA iP3600 Printhead Replacement: paso 3, imagen 1 de 1

    • Lift the printer lid.

    Editar

  5. Canon PIXMA iP3600 Printhead Replacement: paso 4, imagen 1 de 1

    • Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

    Editar

  6. Canon PIXMA iP3600 Printhead Replacement: paso 5, imagen 1 de 2 Canon PIXMA iP3600 Printhead Replacement: paso 5, imagen 2 de 2

    • Push in the white clip to release the ink cartridge from the printhead.

    • Lift the ink cartridge from the printhead.

    • Repeat this process for the remaining ink cartridges.

    • You have successfully removed all ink cartridges.

    Editar

  7. Canon PIXMA iP3600 Printhead Replacement, Printhead: paso 6, imagen 1 de 1

    • After removing all ink cartridges, lift the printhead lock lever.

    Editar

  8. Canon PIXMA iP3600 Printhead Replacement: paso 7, imagen 1 de 1

    • Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.

    Editar

    Comment réparer la tête d'impression

    Mohamed el amine Baali - Contestar

  9. Canon PIXMA iP3600 Printhead Replacement: paso 8, imagen 1 de 1

    • You have successfully removed your printhead.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Caitlyn

Miembro Desde 10/07/14

1,184 Reputación

4 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

USF Tampa, Team 1-3, Leahy Fall 2014 Miembro de USF Tampa, Team 1-3, Leahy Fall 2014

USFT-LEAHY-F14S1G3

3 Miembros

8 Guías creadas

Un comentario

fairly helpful, especially the photo's. but I need advice on how to clean the printhead before trying to replace it,

a1halber - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 7

Ultimos 30 días: 36

Todo El Tiempo: 7,654