Saltar al contenido principal

Canon EOS Rebel XSi Daughter Board Replacement

Qué necesitas

  1. Canon EOS Rebel XSi Daughter Board Replacement, Back Panel: paso 1, imagen 1 de 1
    • Squeeze the eyepiece between your index finger and thumb and lift up and off.

  2. Canon EOS Rebel XSi Daughter Board Replacement: paso 2, imagen 1 de 1
    • Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.

  3. Canon EOS Rebel XSi Daughter Board Replacement: paso 3, imagen 1 de 1
    • Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).

  4. Canon EOS Rebel XSi Daughter Board Replacement: paso 4, imagen 1 de 1
    • Remove grip by slowly peeling off.

  5. Canon EOS Rebel XSi Daughter Board Replacement: paso 5, imagen 1 de 1
    • Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.

  6. Canon EOS Rebel XSi Daughter Board Replacement: paso 6, imagen 1 de 1
    • Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).

  7. Canon EOS Rebel XSi Daughter Board Replacement: paso 7, imagen 1 de 1
    • Remove the side panel by lifting off with fingers.

  8. Canon EOS Rebel XSi Daughter Board Replacement: paso 8, imagen 1 de 1
    • Use hands to pry off the back panel.

  9. Canon EOS Rebel XSi Daughter Board Replacement, Front Panel: paso 9, imagen 1 de 1
    • Using the PH000 screwdriver head, remove the four 3mm screws on the front

  10. Canon EOS Rebel XSi Daughter Board Replacement: paso 10, imagen 1 de 1
    • Remove front grip by gently peeling from the edge towards the center of the camera

  11. Canon EOS Rebel XSi Daughter Board Replacement: paso 11, imagen 1 de 1
    • Using the PH000 screwdriver head, unscrew the 3 mm screw that was under the grip

  12. Canon EOS Rebel XSi Daughter Board Replacement: paso 12, imagen 1 de 1
    • Using the PH000 screwdriver, remove the 4mm screw at the bottom of the camera

  13. Canon EOS Rebel XSi Daughter Board Replacement: paso 13, imagen 1 de 3 Canon EOS Rebel XSi Daughter Board Replacement: paso 13, imagen 2 de 3 Canon EOS Rebel XSi Daughter Board Replacement: paso 13, imagen 3 de 3
    • Remove the front panel by using tweezers to pry the panel over the metal ring protrusion

  14. Canon EOS Rebel XSi Daughter Board Replacement, Daughter Board: paso 14, imagen 1 de 1
    • Using the PH000 screwdriver head, remove the three 3mm screws

  15. Canon EOS Rebel XSi Daughter Board Replacement: paso 15, imagen 1 de 1
    • Carefully remove the cable from its plastic base with fingers

  16. Canon EOS Rebel XSi Daughter Board Replacement: paso 16, imagen 1 de 1
    • Gently slide board out with thumb

  17. Canon EOS Rebel XSi Daughter Board Replacement: paso 17, imagen 1 de 1
    • Gently disconnect cable by pulling out from plastic base with fingers

  18. Canon EOS Rebel XSi Daughter Board Replacement: paso 18, imagen 1 de 1
    • Disconnect cables by pulling out from base with fingers

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Erik Mork

Miembro Desde 01/27/17

596 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 22-10, Maness Winter 2017 Miembro de Cal Poly, Team 22-10, Maness Winter 2017

CPSU-MANESS-W17S22G10

4 Miembros

10 Guías creadas

Un comentario

what does this fix

djratlif - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 13

Todo El Tiempo: 1,230