Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon EOS Rebel XS Strap Loops Replacement

Introducción

Use this guide to remove the two metal neck strap loops.

Qué necesitas

  1. Canon EOS Rebel XS Strap Loops Replacement, Latch Side Cover: paso 1, imagen 1 de 1

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    Traducir

  2. Canon EOS Rebel XS Strap Loops Replacement: paso 2, imagen 1 de 1

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

    Traducir

  3. Canon EOS Rebel XS Strap Loops Replacement, Disassembling Canon EOS Rebel XS Front Cover: paso 3, imagen 1 de 1

    • Remove three medium length screws from the bottom of the camera

    Traducir

  4. Canon EOS Rebel XS Strap Loops Replacement: paso 4, imagen 1 de 1

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    Traducir

  5. Canon EOS Rebel XS Strap Loops Replacement, Back Cover: paso 5, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

    Traducir

  6. Canon EOS Rebel XS Strap Loops Replacement: paso 6, imagen 1 de 1

    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

    Traducir

  8. Canon EOS Rebel XS Strap Loops Replacement, Grip: paso 7, imagen 1 de 1

    • Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.

    Traducir

  9. Canon EOS Rebel XS Strap Loops Replacement: paso 8, imagen 1 de 1

    • Use your fingertip to pry off the external shutter port cover.

    Traducir

  10. Canon EOS Rebel XS Strap Loops Replacement: paso 9, imagen 1 de 1

    • Remove the two 5mm (.20in) long silver screws securing the grip to the camera using a #00 Phillips screwdriver.

    Traducir

  11. Canon EOS Rebel XS Strap Loops Replacement: paso 10, imagen 1 de 3 Canon EOS Rebel XS Strap Loops Replacement: paso 10, imagen 2 de 3 Canon EOS Rebel XS Strap Loops Replacement: paso 10, imagen 3 de 3

    • Use the spudger tool to carefully pry the grip from the rest of the camera.

    Traducir

  12. Canon EOS Rebel XS Strap Loops Replacement: paso 11, imagen 1 de 1

    • Once the grip is loose, use your fingers to remove it from the camera.

    Traducir

  13. Canon EOS Rebel XS Strap Loops Replacement, Eyepiece: paso 12, imagen 1 de 2 Canon EOS Rebel XS Strap Loops Replacement, Eyepiece: paso 12, imagen 2 de 2

    • Grasp the eyepiece with your fingers and slide upwards to remove it.

    Traducir

  14. Canon EOS Rebel XS Strap Loops Replacement, Top Panel: paso 13, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Remove the following ribbons with the tweezers by gently pulling on them.

    • Remove the three black screws, near the eye piece, using the Phillips Screwdriver.

    Traducir

  15. Canon EOS Rebel XS Strap Loops Replacement: paso 14, imagen 1 de 1

    • Remove the cable heads attached on the front side of the camera next to the lens mount.

    • Be gentle when puling wires lose, use the tweezers to remove the wires.

    Traducir

  16. Canon EOS Rebel XS Strap Loops Replacement: paso 15, imagen 1 de 1

    • You can use your fingers to pull the top panel of the camera.

    Traducir

  17. Canon EOS Rebel XS Strap Loops Replacement, Strap Loops: paso 16, imagen 1 de 3 Canon EOS Rebel XS Strap Loops Replacement, Strap Loops: paso 16, imagen 2 de 3 Canon EOS Rebel XS Strap Loops Replacement, Strap Loops: paso 16, imagen 3 de 3

    • Remove the two 5.0mm (.20in) silver screws from the first loop hole using a #00 Phillips screwdriver (Picture Two).

    • Remove the 6.8mm (.27in) wide head silver screw from the second loop hole using a #00 Phillips screwdriver (Picture Three).

    Traducir

  18. Canon EOS Rebel XS Strap Loops Replacement: paso 17, imagen 1 de 2 Canon EOS Rebel XS Strap Loops Replacement: paso 17, imagen 2 de 2

    • Use your fingers to remove the loop holes.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Daniel Bussone

Miembro Desde 01/28/11

1,251 Reputación

11 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 3-41, Regan Winter 2011 Miembro de Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 Miembros

21 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 14

Todo El Tiempo: 889