Introducción
Use this guide to replace a cosmetically damaged latch side cover.
Qué necesitas
-
-
-
Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
Pregunta a FixBot
-
-
-
-
On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
-
Pry up the panel; starting from the front/bottom corner, as indicated.
-
There's a concealed lip, under the opposite edge.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
Cal Poly, Team 3-41, Regan Winter 2011 Miembro de Cal Poly, Team 3-41, Regan Winter 2011
CPSU-REGAN-W11S3G41
Miembros de 2
132 Guías creadas
