Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Use this guide to replace the grip of the camera.
Qué necesitas
-
-
Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
-
-
-
Remove three medium length screws from the bottom of the camera
-
-
-
-
Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un comentario
Little confused. Some pics are from a analog Canon, other from a digital Canon...