Introducción

Using these instructions, we'll make it easy and simple for you to replace the LCD in your Canon camera.

Partes

No se requieren partes.

  1. Locate the battery cover at the bottom of the camera.
    • Locate the battery cover at the bottom of the camera.

    • Pull down on the black tab to open the cover.

  2. Push the grey tab on the right side of the battery.
    • Push the grey tab on the right side of the battery.

    • Remove the battery from the slot.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the six screws on the housing of the LCD. Four 3.1mm Phillips screws on the side with the hinge. Two 2.7mm Phillips screws
    • Remove the six screws on the housing of the LCD.

      • Four 3.1mm Phillips screws on the side with the hinge.

      • Two 2.7mm Phillips screws

  5. Remove the plastic back of the LCD.
    • Remove the plastic back of the LCD.

  6. Unplug the blue cable attached to the back of the LCD. Unplug the blue cable attached to the back of the LCD.
    • Unplug the blue cable attached to the back of the LCD.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Jordan Rabold

Miembro Desde 14/04/14

673 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 12-33, Maness Spring 2014 Miembro de Cal Poly, Team 12-33, Maness Spring 2014

CPSU-MANESS-S14S12G33

4 Miembros

7 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 32

Todo El Tiempo: 3,883