Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Removing the top cover of camera gives access to the LCD screen, control dial, and flash.
Qué necesitas
-
-
Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.
-
-
-
Remove the two 6.4mm screws above the lens aperture using a phillips #00 screw driver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.