Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Many times when it seems as if your LCD screen is cracked, it is just the plastic protector, not the actual screen. It is a simple and cheap piece to replace.
Qué necesitas
-
-
Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.
-
-
-
Remove the two 6.4mm screws above the lens aperture using a phillips #00 screw driver.
-
-
-
-
Use a soft cloth to push up on the LCD plastic protector from underneath the top of the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.