Repara tus cosas Comunidad Tienda

Canon EOS 60D: Replacing Eye piece and Battery door

Introducción

This is fairly straight forward, and something you may do in the normal use of your camera. It is even in the manual.

  1. Canon EOS 60D: Replacing Eye piece and Battery door, Eye piece and Battery door: paso 1, imagen 1 de 2 Canon EOS 60D: Replacing Eye piece and Battery door, Eye piece and Battery door: paso 1, imagen 2 de 2

    • Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.

    • Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.

    Traducir

  3. Canon EOS 60D: Replacing Eye piece and Battery door: paso 2, imagen 1 de 2 Canon EOS 60D: Replacing Eye piece and Battery door: paso 2, imagen 2 de 2

    • Open the battery door

    • Rotate the door so the one side of the hinge pops out (see photo #2)

    • Slide other pin out (it pops out the same, but this is easier)

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Rubber grips will require adhesive. (I havent gotten this far, I assume rubber cement / double stick tape may work)

4 personas más completaron esta guía.

Autor

con 1 otro colaborador

Eric D

Miembro Desde 11/13/12

1,284 Reputación

5 Guías creadas

Insignias: 15

+ 12 más insignias

Un comentario

But how do you REPLACE the rubber eye piece? Mine seems to be NOT glued, but in a tract of sorts.

Wendell C Durnil - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 16

Todo El Tiempo: 5,921