Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This will allow you access to the ports, or if you need to replace the dust cover, will allow you to do that.
Qué necesitas
-
-
Use a thin piece of plastic, spudger, or fingernail (if you have them) to lift up the edge of the grip, and pull up slowly.
-
Repeat for the other two grips
-
Remove the adhesive like you would rubber cement, just rub your finger against it, it will come off.
-
Optionally throw the balled up adhesive at people pretending its a booger :)
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
7 personas más completaron esta guía.