Introducción

The strap loops can be safely accessed and removed.

Partes

No se requieren partes.

Slide the outer eyepiece upward to remove it.
  • Slide the outer eyepiece upward to remove it.

Agregar Comentario

Remove the two 4.75 mm black screws located  on the top of the camera.
  • Remove the two 4.75 mm black screws located on the top of the camera.

Agregar Comentario

  • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Agregar Comentario

  • Slowly separate the top panel from the camera by pushing it upward.

  • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Agregar Comentario

  • Remove two 5.9 mm silver screws on top of camera to detach left strap loop (opposite grip).

Agregar Comentario

  • Remove one 8.5 mm silver screw (front) and one 5.45 mm silver screw (back) to remove strap loop near LCD screen.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 8-8, Regan Spring 2011 Miembro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 8

Todo El Tiempo: 2,162