Introducción

The three stacked rings in the lens mount ring can be safely and easily removed.

Partes

No se requieren partes.

  1. Remove the two 4.8 mm black screws above the lens on the front of the camera.
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Remove the 4.8 mm black screw on the left side of the camera.
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  5. Remove the front panel by lifting it away from the camera's body.
    • Remove the front panel by lifting it away from the camera's body.

  6. Remove four 7.1 mm silver screws from lens mount ring.
    • Remove four 7.1 mm silver screws from lens mount ring.

  7. Remove outer mount ring.
    • Remove outer mount ring.

    • The silver button may detach.

  8. Remove thin gold ring.
    • Remove thin gold ring.

    • Correct orientation is pictured.

  9. Remove thin silver ring.
    • Remove thin silver ring.

    • Correct orientation is pictured.

  10. All rings are removed.
    • All rings are removed.

    • Follow pictures in reverse order to replace rings.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Antonia

Miembro Desde 17/04/11

109 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 8-8, Regan Spring 2011 Miembro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Miembros

11 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 24

Todo El Tiempo: 4,222