Repara tus cosas Comunidad Tienda

Canon ELPH Z3 Camera Shutter Button Replacement

Introducción

The shutter button is one of the most important components of a camera. The shutter button is the button one would press in order to take a picture. It is not uncommon for issues to arise with shutter buttons because they are heavily used. Any issues ranging from dirt build up or a connection malfunction. This easy to follow guide will show you how to gain access to the shutter button for cleaning and how to fully replace the shutter button for the Canon ELPH Z3.

Qué necesitas

  1. Canon ELPH Z3 Camera Shutter Button Replacement, Shutter Button: paso 1, imagen 1 de 3 Canon ELPH Z3 Camera Shutter Button Replacement, Shutter Button: paso 1, imagen 2 de 3 Canon ELPH Z3 Camera Shutter Button Replacement, Shutter Button: paso 1, imagen 3 de 3

    • Unscrew the 7 4.1mm screws around the camera using a PH000 screwdriver.

    Editar

  2. Canon ELPH Z3 Camera Shutter Button Replacement: paso 2, imagen 1 de 3 Canon ELPH Z3 Camera Shutter Button Replacement: paso 2, imagen 2 de 3 Canon ELPH Z3 Camera Shutter Button Replacement: paso 2, imagen 3 de 3

    • Split the front and back coverings of the camera.

    • Remove the back covering completely.

    • This allows for easier access to the shutter button carrier.

    Editar

  4. Canon ELPH Z3 Camera Shutter Button Replacement: paso 3, imagen 1 de 2 Canon ELPH Z3 Camera Shutter Button Replacement: paso 3, imagen 2 de 2

    • Slide the shutter button carrier off of the camera.

    • Notice shutter button is on the right hand side of the carrier.

    Editar

  5. Canon ELPH Z3 Camera Shutter Button Replacement: paso 4, imagen 1 de 3 Canon ELPH Z3 Camera Shutter Button Replacement: paso 4, imagen 2 de 3 Canon ELPH Z3 Camera Shutter Button Replacement: paso 4, imagen 3 de 3

    • Press upward on the shutter button from the underside of the carrier by using your thumb.

    • Separate the shutter button from the carrier.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Nathan Barros

Miembro Desde 10/18/16

1 Reputación

3 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

UMass Dartmouth, Team 1-7, Catania Fall 2016 Miembro de UMass Dartmouth, Team 1-7, Catania Fall 2016

UMASSD-CATANIA-F16S1G7

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 301