Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Remove the first set of two screws from the lens outer casing using a Phillips #00 screwdriver.

    • The first set of screws is located on the front and bottom of the lens casing.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2
    • Remove the remaining two screws from the right and left sides of the lens outer casing using a Phillips #00 screwdriver.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • Remove the lens casing by pulling it away from the body of the camera.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • Remove the four #00 screws from the SLR lens mount using a Phillips #00 screwdriver.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 3 : paso 5, imagen 2 de 3 : paso 5, imagen 3 de 3
    • Pull the SLR lens mount away from the body of the camera.

    • Be aware that a pin will fall out when the SLR lens mount is removed.

Linea de Meta

6 personas más completaron esta guía.

Joe Blumberg

Miembro Desde 10/04/11

213 Reputación

1 Guía escrita

Equipo

UW Stout, Team 5-1, Zhou Fall 2011 Miembro de UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 13

Ultimos 30 días: 66

Todo El Tiempo: 11,627