Introducción

This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.

Partes

No se requieren partes.

Remove the first set of two #00 phillips screws from the lens outer casing
  • Remove the first set of two #00 phillips screws from the lens outer casing

    • The first set of screws are located on the front and bottom of the lens casing

    • Pull the screws out and set them aside so as not to lose them

Agregar Comentario

Remove the remaining two #00 phillip screws from the lens outer casing
  • Remove the remaining two #00 phillip screws from the lens outer casing

    • The second set is located left and right side of the lens casing

    • Pull the screws out and set them aside so as not to lose them

Agregar Comentario

  • Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.

Agregar Comentario

  • Remove the four #00 phillips screws from the SLR Lens Mount

Agregar Comentario

  • After the screws have been removed, pull the SLR Lens Mount away from the body of the camera

  • Be aware that a pin will fall out when the SLR Lens Mount is removed.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Joe Blumberg

Miembro Desde 04/10/11

150 Reputación

1 Guía escrita

Equipo

UW Stout, Team 5-1, Zhou Fall 2011 Miembro de UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 17

Últimos 30 Días: 74

Todo El Tiempo: 7,774