Saltar al contenido principal

Introducción

This guide will teach a user how to replace a broken film rewind crank on the Canon AE-1 SLR. The film rewind crank allows the photographer to reel film back into its container once all exposures have been shot so that the film can be developed.

  1. Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.
    • Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.

  2. Remove the crank by rotating it counter-clockwise.
    • Remove the crank by rotating it counter-clockwise.

  3. Remove two phillips screws With the screws removed, the silver plate can now be removed as well.
    • Remove two phillips screws

    • With the screws removed, the silver plate can now be removed as well.

  4. Remove the film rewind crank.
    • Remove the film rewind crank.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Ben Barber

Miembro Desde 04/10/11

408 Reputación

2 Guías creadas

Equipo

UW Stout, Team 5-1, Zhou Fall 2011 Miembro de UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 25

Ultimos 30 días: 139

Todo El Tiempo: 20,247