Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide describes the steps necessary to replace the motherboard of the system. This board contains the circuitry for the amplification, power, and output.
Qué necesitas
-
-
-
Remove 2 screws from each side of the heatsink. These must be accessed from directly above the device.
-
Remove the green grounding wire from the mounting screw.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.