Saltar al contenido principal

CHI Spin N Curl Rotating Curler Power Cord Replacement

Qué necesitas

  1. CHI Spin N Curl Rotating Curler Power Cord Replacement, Power Cord: paso 1, imagen 1 de 1
    • Use a metal spudger to pry off the silver, shiny trim.

  2. CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 2, imagen 1 de 1
    • Remove inner black housing of the CHI Spin N Curl using the metal spudger to pop it out.

  3. CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 3, imagen 1 de 2 CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 3, imagen 2 de 2
    • Use a 2 mm flathead to remove the two screws.

  4. CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 4, imagen 1 de 2 CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 4, imagen 2 de 2
    • Use a metal spudger to pry open the seams of the device.

  5. CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 5, imagen 1 de 3 CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 5, imagen 2 de 3 CHI Spin N Curl Rotating Curler Power Cord Replacement: paso 5, imagen 3 de 3
    • Toward the bottom of the device, grab the swivel power cord.

    • Gently pull the power cord to detach it from the CHI Spin N Curl

    • Replace the faulty cord when the original cord has been removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

UMass Dartmouth, Team 2-7, Petersen Fall 2022 Miembro de UMass Dartmouth, Team 2-7, Petersen Fall 2022

UMASSD-PETERSEN-F22S2G7

3 Miembros

6 Guías creadas

Un comentario

but where to get new cable?

Kristián Feldsam - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 308