Introducción
Usa esta guía para taladrar un agujero de llavero en un AirTag.
Intenta este procedimiento bajo tu propia responsabilidad.
Taladrar a través de tu AirTag puede dañar su funcionamiento y anulará la resistencia al agua IP67 de tu dispositivo.
- Ten cuidado *** - Esta no es una adición necesaria, ya que hay llaveros baratos de terceros disponibles en sitios como Amazon. Hazlo por tu cuenta, ya que puedes terminar rompiendo el dispositivo y Apple no lo aceptará bajo la garantía.
Qué necesitas
-
-
Usa los dos pulgares para empujar hacia abajo la puerta del compartimento de las pilas.
-
-
-
Gira la puerta del compartimento de la pila en sentido contrario a las agujas del reloj para desengancharla del marco.
-
-
-
Levanta la puerta del compartimento de la batería para extraerla.
-
-
-
Levanta y retira la batería.
Das sollte man aus der Hersteller-Anleitung auch beachten: „CR2032-Batterien mit einer Bitterstoffbeschichtung funktionieren möglicherweise nicht mit dem AirTag oder anderen batteriebetriebenen Produkten, je nach Ausrichtung der Beschichtung in Bezug auf die Batteriekontakte.“
Ob es funktioniert oder nicht, kann man so feststellen: Beim Hereindrücken der Batterie muß ein Piepston ertönen. Piepst es nicht, könnte es an der Bitterstoffbeschichtung liegen.
Und bevor man nun lange herumsucht, sei diese überaus hilfreiche Erläuterung aus der iPhone-Gemeinde wiedergegeben:
https://communities.apple.com/de/thread/... - Originalzitat:
petereu
04. Dez. 2022 18:54 als Antwort auf PreCognition
Die CR2032-Knopfzellen von Panasonic funktionieren einwandfrei :-) Soweit ich sehe, verkauft nur Duracell die CR2032 mit Bitrex-Beschichtung. Man erkennt den Unterschied an der Aufschrift baby secure pack (keine Beschichtung) gegenüber baby secure pack & battery (mit Beschichtung). -
-
-
-
Para evitar dañar los componentes internos, taladraremos en el espacio cercano a los clips.
-
-
-
Rota el AirTag de manera que la marca CE este recto.
-
Usa un rotulador o un lápiz para pintar un punto donde quieres hacer el agujero.
-
-
Herramienta utilizada en este paso:File Set$5.99
-
Usando una lima de metál retira todos los bordes afilados del agujero.
-
Quita todos las partículas de plástico sobrante antes de poner la anilla
-
-
-
Mete la anilla en el agujero.
Well it is not a bad idea what I would do is to add a smaller split ring that is about 3/8th inch in diameter. This will allow the fob to lay flat against the rest of the keys and fit more comfortably in a person’s pocket.
-
Para volver a montar tu dispositivo, sigue esta guía en sentido inverso.
¿La modificación no salió como planeabas?
Busca ayuda en nuestra comunidad de respuestas de AirTag.
Para volver a montar tu dispositivo, sigue esta guía en sentido inverso.
¿La modificación no salió como planeabas?
Busca ayuda en nuestra comunidad de respuestas de AirTag.
Cancelar: No complete esta guía.
10 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
8 comentarios
ifixit has been an incredible resource for me (and the world!) since about 2006, I believe. And although, technically, me replacing a Mac’s hard drive may void my warranty, THIS particular project is just so darned unnecessary and a guarantee to void any warranty. I have two AirTags. One is in a Belkin protector, the other in a silicon fob from Amazon. I’ll continue to recommend ifixit to my audiences - but this project is just, well, weird. How about a fix for the AirTags NOT accepting a Duracell 2023 battery?
Isn’t also just weird yet trademark Apple to not provide any accessory with the product that allows you to hold it or attach it to any keyring without a separate purchase?
well, this is a cheap alternative to give apple the same money you already gave them for the tag, but i still prefer third party accesories.
I can’t think of any reason to do this.
No points given.
there is no reason to drill a hole in your airtag - just buy a keyring accessory for it instead of risking breaking your airtag. I agree donald.
tayola -
Good job of showing how to be able to add a key ring. Thank you!
This guide isn’t that help. You can just buy a cheap apple AirTag holder with a key ring holder instead of drilling a hole into an Apple AirTag
Die Daumen rutschen gerne ab, man denkt der Deckel klemmt. Abhilfe: z.B. Latex-Einmalhandschuhe (z.B. aus der Apotheke) anziehen, dann geht es ganz leicht, weil nichts mehr rutscht.
Nano Mymse - Contestar