Saltar al contenido principal

Cómo restablecer el SMC en MacBooks

    • Estas MacBooks tienen un chip de seguridad T2:

    • MacBook Air introducido en 2018 o posteriormente.

    • MacBook Pro introducido en 2018 o posteriormente.

    • Si tienes un chip T2 puedes restablecer el SMC de la siguiente manera (de lo contrario, omite este paso):

    • Mantén los botones de "Control" y "Option" (Alt) en el lado izquierdo de tu teclado y el "Shift" en el lado derecho de su teclado durante 7 segundos.

    • Luego, adicionalmente, mantén presionado el botón de encendido y mantén presionadas las cuatro teclas por otros 7 segundos, luego suéltalas.

    • Presiona el botón de encendido después de unos segundos para encender tu MacBook.

    Notice the phrase “Your Mac might turn on.“, in Apple’s official reset instructions located at https://support.apple.com/en-us/HT201295

    Jim Julian - Contestar

    • Estos modelos tienen una batería que no se puede extraer (según la definición de Apple):

    • MacBook Pro (Principios de 2009) y posteriores

    • Todos los modelos de MacBook Air

    • MacBook (Finales de 2009)

    • MacBook (Retina, 12 pulgadas , Principios 2015) y posteriores

    • Procede con el próximo paso para restablecer tu SMC.

    • Para otros modelos, omite este y el próximo paso.

    The MacBook Pro 2009-2012 are removable. All MacBook Airs until 2017 are removable. Any Pro mode from 2013-2019 are not removable.

    Ryan Boosel - Contestar

    The non-removable refers to the Apple definition of “removable”. Of course are the batteries removable, if the device is opened :)

    Tobias Isakeit -

    • Apaga tu Mac.

    • Desenchufa el MagSafe o el adaptador USB-C de tu computadora.

    • Usando el teclado incorporado, presiona Shift-Control-Option en el lado izquierdo del teclado, y luego presiona el botón de encendido al mismo tiempo. Mantén estas teclas y el botón de encendido durante 10 segundos.

    • Libera las teclas.

    • Reconecta el adaptador.

    • Presiona el botón de encendido nuevamente para encender tu Mac.

    This is also not entirely true. Models that have a T2 chip (2018-2019) use a different SMC reset.

    Right Shift+Left Option+Left CMD for 7 seconds

    Then, while holding all three of those keys, press and hold the power button for another 7 seconds.

    Ryan Boosel - Contestar

    Thanks for the note on the T2 chip. I added this information to the guide.

    Tobias Isakeit -

    Si l'ensemble des touches ne fonctionne pas , est-ce que on peut utiliser un clavier externe de type Windows

    NIKOLAS TESLA - Contestar

    And what if this procedure fails?

    ROBERT MONTGOMERY JR - Contestar

    • Apaga tu Mac.

    • Desconecta el adaptador MagSafe de tu computadora.

    • Remueve la batería.

    • Presiona y mantén el botón de encendido durante 15 segundos.

    • Reconecta la batería y el adaptador MagSafe.

    • Presiona el botón de encendido para encender tu Mac.

    • El LED del adaptador de corriente MagSafe podría cambiar de color o apagarse temporalmente al restablecer el SMC.

    Danke, es hat funktioniert :)

    Wir haben ein MacBook Model A1181 von NOV 2007 mit herausnehmbare Akku.

    Ich habe die Anleitung ein bisschen variiert, nur aus Neugier weil der MacBook normal funktionierte bis auf das Aufladen, der MagSafe Ladedioden leuchteten nicht und es zeigte auch kein Ladevorgang auf dem Bildschirmanzeige.

    Zuerst habe ich das MacBook ausgeschaltet. Dannach habe ich das Ladekabel abgezogen und das Akku entfernt. Mit gedrückten EIN/AUS Schalter habe ich die 5 Sekunden abgezählt dann wieder los gelassen.

    Gegen der Empfehlung, habe ich nur die MagSafe Ladekabel angeschlossen ohne den Akku einzubauen und nach etwa 2 sekunden ging die Ladediode wieder an, leuchtete sogar grün. Das MagSafe Power Adapter hatte ich über eine schaltbare Steckdosenleiste.

    Dann schaltete ich das MagSafe Power Adapter wieder ab und baute den Akku ein. Dannach schaltete ich erst den MagSafe Power Adapter wieder ein, die Ladedieode leuchtete gelb, dann startete ich den MacBook mit den EIN/AUS Schalter.

    Bob DUS

    Bob DUS - Contestar

Conclusión

Se ha restablecido el SMC de tu MacBook.

25 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

mikeyd123

Miembro Desde 04/04/18

789 Reputación

2 Guías creadas

6 comentarios

Il mio MacBook Pro 2019 nuovo di 3 mesi non vuole accendersi.

Ieri sera con la batteria 1% ho spento il mac. Stamattina non vuole avviarsi, non da segni di vita.

Il mac fa solo un suono quando attacco il caricatore, poi nulla. Dopo 2 ore in carica niente.

Cosa mi consigliate?

Grazie

Mario Scotti - Contestar

merci ! fonctionne parfaitement depuis ?

David Derisoud - Contestar

Mahalo, mikeyd123!
I just purchased a refurbished MBP 15 (11,5) mid-2015 Retina, macOS 12.2.1, and was having an issue with the fan running non-stop, from boot-up to shut-down. Resetting the SMC seems to have addressed the fan issue. Hopefully there are no thermal issues. If there are, iʻll check back in.

Kahana - Contestar

I have this same model and am

Having the same issue but I can’t figure out which sequence of buttons! Please advise!

Gerene Townsend -

I followed the reset instructions for my MacBook Retina 2017 (A1534) but now I get a Recovery Assistant & I'm asked to rest my password. I don't need to reset my password, I just want to reset to factory settings because a new owner will use this MacBook.

Ivana Sifuentes - Contestar

Does the Macbook Pro 2018 and newer Intel (T2) start without battery?

What if i dont have it anymore, what steps do i have to accomplish?

Vladimir Lebedyev - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 207

Ultimos 7 días: 1,173

Ultimos 30 días: 5,365

Todo El Tiempo: 185,899