Introducción
Tuve que hacer una guía separada para esta Mac, ya que esta Mac tiene el nuevo chip T2 y requiere un procedimiento diferente a los demás computadoras de escritorio Mac.
-
-
Elija el menú Apple> Apagar.
-
Después de que su Mac se apague, mantenga presionado su botón de encendido durante 10 segundos.
-
Suelte el botón de encendido, luego espere unos segundos.
-
Presiona el botón de encendido nuevamente para encender tu Mac.
-
-
-
-
Elija el menú Apple> Apagar.
-
Después de que su Mac se apague, desenchufe el cable de alimentación.
-
Espera 15 segundos.
-
Enchufe nuevamente el cable de alimentación.
-
Espera 5 segundos, luego presiona el botón de encendido nuevamente para encender tu Mac.
-
-
-
Apaga tu Mac.
-
Luego enciéndalo e inmediatamente mantenga presionadas estas cuatro teclas juntas: Opción, Comando, P y R.
-
Puede soltar las teclas después de unos 20 segundos, durante los cuales puede parecer que su Mac se reinicia.
-
Puede soltar las teclas después de que aparezca el logotipo de Apple y desaparezca por segunda vez.
-
Debes tener un teclado con cable hecho por Apple para que esto funcione.
-
Puedes comprar uno en Amazon aquí.
I have never been able to do a PRAM reset on my iMac Pro. I even got the stock extended wireless keyboard out of the box to try to do it, and never get the satisfying triple gong of yore.
It needs to be a wired keyboard made by Apple, not a wireless keyboard.
Hello C Adams, it is very true I share Aaron's grip, you have to use an Original Apple keyboard with cable to be able to restart the SMC + PRAM + and + NVRAM, and any on the iMac or any Mac, greetings
Miguel -
it worked! and, if you want your startup sound back on the iMac Pro, use this terminal command:
sudo nvram StartupMute=%00
You don’t have to shut down the computer; restarting works just as well. Just ensure the four keys are down as soon as possible after the screen goes dark.
A wireless keyboard connected with a Lightning-to-USB cable permits parameter RAM reset. You don’t have to buy a new wired keyboard.
Command-Option-P-R works with a wireless keyboard wired with the lightning cable (the one coming with the iMac Pro); however do not shutdown the Mac first.
Boot the Mac, restart it. As the screen goes black and before the Apple logo shows, press Command-Option-P-R and hold it ; the screen will stay blank and then after about 20s the apple logo will appear and the dong will be heard. Keep pressing Command-Option-P-R until the logo disappear and re-appear a 2nd time with the dong sound
-
Si ha probado todos estos reinicios y aún tiene problemas, diríjase a nuestro foro de respuestas.
Si ha probado todos estos reinicios y aún tiene problemas, diríjase a nuestro foro de respuestas.
Cancelar: No complete esta guía.
8 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
Un comentario
one of my thunderbolt ports stopped working. I used the SMC and PRAM reset and they all worked afterwards. thanks!
After the iMac Pro shut down, I pressed and held the power button for 10 seconds. It began to power up so this didn’t seem to work.
C Adams - Contestar
What is the problem you are trying to solve by attempting to do these resets?
[deleted] -