Saltar al contenido principal

Cómo rellenar un Mechero Zippo

Qué necesitas

  1. Cómo rellenar un Mechero Zippo, Cómo rellenar un Mechero Zippo: paso 1, imagen 1 de 1
    • Compra combustible para mechero - cualquier tipo, pero no uses líquido combustible orientado para barbacoa.

  2. Cómo rellenar un Mechero Zippo: paso 2, imagen 1 de 2 Cómo rellenar un Mechero Zippo: paso 2, imagen 2 de 2
    • Abre la tapa del Zippo y retira el inserto. Agarra firmemente los dos lados de la rueda de pedernal con dos dedo s.Agarra la parte inferior con tu otra mano y tira hacia arriba hasta sacar el mechero de la carcasa.

  3. Cómo rellenar un Mechero Zippo: paso 3, imagen 1 de 1
    • Deja a un lado la carcasa.

  4. Cómo rellenar un Mechero Zippo: paso 4, imagen 1 de 1
    • Dale la vuelta al inserto- debería haber una esponjilla de felpa con la serigrafía "Lift to fuel"

  5. Cómo rellenar un Mechero Zippo: paso 5, imagen 1 de 1
    • Extiende el clip. Mete uno de los extremos en el pequeño agujero de la felpa y levántala.

    FWIW, the tiny hole is designed and perfectly sized for a spare flint. When off in the world and your lighter has fuel but will not spark, having a flint handy can mean the difference between flame or frustration

    Francis Beeman - Contestar

  6. Cómo rellenar un Mechero Zippo: paso 6, imagen 1 de 1
    • Aprieta la botella de combustible una sola vez sobre el algodón del interior.

    • Si tu botella de combustible es muy grande, puedes echar un poco de liquido en un contenedor mas pequeño y manejable.

  7. Cómo rellenar un Mechero Zippo: paso 7, imagen 1 de 1
    • Espera cinco segundos. Luego, aprieta dos veces más la botella para verter un poco más de liquido en el algodón.

  8. Cómo rellenar un Mechero Zippo: paso 8, imagen 1 de 1
    • Cierra el protector de felpa.

  9. Cómo rellenar un Mechero Zippo: paso 9, imagen 1 de 1
    • Mete el inserto en su carcasa.

  10. Cómo rellenar un Mechero Zippo: paso 10, imagen 1 de 1
    • Deja que el Zippo absorba el combustible durante 1 o 2 minutos.

    • Mientras esperas, lávate las manos.

    • ¡Hecho! Enciende el Zippo.

    Holaa, llevo 2 años sin cargar la bencina, la mecha esta seca asi q creo q si le pongo bencina no va a encender, q puedo hacer?

    G N - Contestar

    Fill the lighter with fuel and let the fuel soak in for a while. That should help.

    Toon Konings - Contestar

Linea de Meta

25 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Danielle Tran

Miembro Desde 02/24/15

709 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 23-4, Green Winter 2015 Miembro de Cal Poly, Team 23-4, Green Winter 2015

CPSU-GREEN-W15S23G4

7 Miembros

15 Guías creadas

4 comentarios

I do have money to buy fluid could i put fluid from another lighter in it

Trinity Bullock - Contestar

Howdy Trinity - it’s possible, but unlikely, that would work.

Zippo uses a white gas/naphtha type fuel. BIC, and most other encased plastic lighters, use butane type fuel.

Butane has to stay in a tightly sealed container or it will evaporate within a few minutes. Zippo lighters do not have this tight of a seal (even when upgraded with rubber or silicone gaskets).

If you have another Zippo lighter with the correct fluid in it I would recommend transferring the insert. This is easier than attempting to transfer the fluid itself as that is a complicated process resulting in losing a lot of the fluid anyway.

It’s possible to use non-branded forms of white gas/naphtha fluid in a lighter but I can’t recommend using anything other than “lighter fluid”. Other naphtha type fuels have application specific additives and may be extremely toxic.

PLEASE NOTE: some fluids marked as “white gas” are actually additive-free gasoline. This is highly explosive and therefore extremely dangerous to use as a lighter fluid.

Bird -

I always check the flint is still striking a spark before refilling as this is much less messy when the lighter is empty rather than full.

If there is no spark when triggered then the flint probably needs renewing, if there is spark and no ignition then refill,

Richard Morgan - Contestar

You can also use old bic lighters for the flint, the life of the fluid ends far passed the life of the flint.

Phillip kalanick - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 46

Ultimos 30 días: 236

Todo El Tiempo: 152,081