Esta traducción podría no reflejar los cambios más recientes añadidos a la guía de referencia. Ayúdanos a actualizar la traducción o revisa la guía original.
Introducción
[vídeo|https://www.youtube.com/watch?v=nb-echTq...]
Hola a todos, en esta guía de video, les mostraré cómo desmontar la PS5 y limpiar el polvo del ventilador y el disipador de calor. Con el tiempo, el radiador dentro de la PlayStation 5 se obstruye con polvo y el sistema se sobrecalienta. Para resolver este problema, debes limpiar tu consola de juegos.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Backup PS5 if possible
-
Gracefully shutdown the PS5
-
Unplug all cables and move to a clean working area.
-
Gather required tools
-
TR8 Torx(security bit)
-
P1 Screw Driver
-
Magnetic Project Mat
-
Plastic prying tools and Spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove Optical side cover
-
If the optical drive is closest to you, lift up on top left corner.
-
Clean accessible areas with a non-static brush, compressed-air, or vacuum.
-
When finished, flip over to remove PS logo side panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove cover by gently pulling up on corner by PS logo a sliding towards the Vertical Botton of PS5.
-
Clean area as much as possible
-
Now flip the ps5 back over to the optical bay side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a spludger tool:
-
Carefully pry inlet grill from top-left to bottom right.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove Molex connection cover using flat end of plastic probe
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using two spludgers
-
Pry either side of the fan molex connector to disconnect.
-
TR8 Bit: Remove 4 x screws
-
2x Screw w/ machine threads top-right and bottom-right (23.3mm)
-
1x Short screw with coarse threads on bottom left (11.4mm)
-
1x Long screw w/ coarse threads on top-left (31mm)
-
Remove fan cover
-
Remove fan assembly
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
If heavy accumulation of dust is present on heatsink, proceed with further disassembly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use P1 bit driver to remove 1 x Screw
-
Remove m.2 cover plate and set aside.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Proceeding further will void your manufacturer warranty. Proceed at your own risk!
-
Remove stick to reveal TR8 bit head screw
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
TR8 Bit: Remove 11 x screws
-
These screws vary in sizes so pay attention to where they go.
-
Remove cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use spudger to depress metal clip for ribbon cable connecting from the main unit to the optical drive.
-
The optical drive can now be removed and set aside.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove 3x Ribbon Cables
-
Remove 2 x uFL Wifi
-
RW & RB
-
FW & FB
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove 41 X Torx Screws (Silver Screws)
-
Remove 1 X Torx Black Screw
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect Ribbon Cable
-
Flip over
-
Remove 2 x Torx Screws (29.4mm)
-
Remove Cover
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Follow these steps in reverse or follow above video.
-
Para volver a armar tu dispositivo, sigue estas instrucciones en orden inverso.
Para volver a armar tu dispositivo, sigue estas instrucciones en orden inverso.
Cancelar: No complete esta guía.
23 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
8%
¡ Francisco Javier Saiz Esteban nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
7 comentarios
Thanks! Man that was alot of screws!
Awesome video, and one that showed you how to put it back together!! much appreciated sir
This was my second time tearing down the PS5 to clean it... and it was still a very annoying process.
It was made much easier with this guide, though. Thanks for all the work you put in to making it! Much appreciated.
Thanks for tutorial. You just saved me some money