Bush Pump Head and Handle Replacement

Introducción

Follow this guide to remove a bush pump's head and handle for repair or replacement. Be sure to use at least two people when following this guide to prevent injury, as the pump head can be heavy.

Paso 1 Head and Handle

Bush Pump Head and Handle Replacement, Head and Handle: paso 1, imagen 1 de 2

Bush Pump Head and Handle Replacement, Head and Handle: paso 1, imagen 2 de 2

Test pump performance by pumping 40 strokes.
An effective pump should return at least 10 liters.

Editar

Paso 2

Remove the two pins connecting the handle to the slider.

Editar

Paso 3

Pull the two lever arms away from the slider.

Editar

Paso 4

Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

Editar

Paso 5

Bush Pump Head and Handle Replacement: paso 5, imagen 3 de 3

Throughout this step, make sure you support the handle and head with at least three hands.
Slide the bearing rod out of the head.
Inspect the bearing rod and head for any wear or tear.