Brother PT-D200 Tape Cassette Replacement

Introducción

This short guide will show you how to properly replace the tape cassette in your label printer.

Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.

Insert the tape cassette into the area outlined in red, making sure that it snaps into place.
Our device did not come with a tape cassette but one should be inserted into the red outlined area shown.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 01/24/14

101 Reputación

1 Guía escrita

CPSU-REGAN-W14S13G16

3 Miembros

6 Guías creadas

How do you remove that tape when it is full?