Saltar al contenido principal

Introducción

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

  1. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.
    • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

  2. Once the label maker is open, remove the six AAA drained batteries.
    • Once the label maker is open, remove the six AAA drained batteries.

    • If your using an AC adapter, replace the old one with the new HQRP adapter.

    • If you see white on the batteries, that would be corrosion. Be careful when disposing.

  3. Now place in the new six AAA batteries. Make sure the batteries are correctly in and touching the golden prongs. Make sure the batteries are correctly in and touching the golden prongs.
    • Now place in the new six AAA batteries.

    • Make sure the batteries are correctly in and touching the golden prongs.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

Miembro Desde 25/10/14

318 Reputación

3 Guías creadas

Equipo

Gateway, Team 1-4, Johnson Fall 2014 Miembro de Gateway, Team 1-4, Johnson Fall 2014

GCC-JOHNSON-F14S1G4

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 588