Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Many functions, including the LCD screen dial pad and device functions can wear and no longer work and may need to be replaced.
Qué necesitas
-
-
Unscrew these three 12.1mm screws holding the control panel in place.
-
-
-
-
Lift up the front panel from the device.
-
Gently lift up and pull out the data cables that attach the panel to the printer.
-
To reassemble the front panel, follow these instructions in reverse order.
To reassemble the front panel, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un comentario
Be sure the three plastic tabs on the bottom of the black front cover are inserted fully when you snap the cover back into place or else you will get a message saying the ink door is not closed.