Repara tus cosas Comunidad Tienda

Brother MFC-490CW Front Panel Replacement

Introducción

If you need to access the internal components of the Brother MFC-490CW, you will have to remove the front panel of the Brother MFC-490CW. Use this guide to remove the front panel of this device.

Qué necesitas

  1. Brother MFC-490CW Front Panel Replacement, Remove screws holding the front panel: paso 1, imagen 1 de 1

    • Use a Phillips #2 screwdriver to remove the three 12.1 mm screws holding the control panel in place.

    Editar

  3. Brother MFC-490CW Front Panel Replacement, Unplug the panel from the rest of the printer: paso 2, imagen 1 de 3 Brother MFC-490CW Front Panel Replacement, Unplug the panel from the rest of the printer: paso 2, imagen 2 de 3 Brother MFC-490CW Front Panel Replacement, Unplug the panel from the rest of the printer: paso 2, imagen 3 de 3

    • Lift up the front panel from the device.

    • Gently lift up and disconnect the data cables that attach the panel to the printer.

    Editar
Conclusión

To reassemble the front panel, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 9 otros colaboradores

Matt

Miembro Desde 10/30/14

64 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

UMass Dartmouth, Team 4-4, Miles Fall 2014 Miembro de UMass Dartmouth, Team 4-4, Miles Fall 2014

UMASSD-MILES-F14S4G4

3 Miembros

8 Guías creadas

Un comentario

Be sure the three plastic tabs on the bottom of the black front cover are inserted fully when you snap the cover back into place or else you will get a message saying the ink door is not closed.

Raymond Rinaldi - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 1,690